Conference Calling Using The Infotainment Controls; Ending A Call; Transferring A Call; Muting A Call - Chevrolet Volt 2013 Infotainment System

To decline answering the
incoming call, press Decline on
the screen or take no action.
Press / to disconnect the
current call and switch to the call
on hold.
Conference calling and three-way
calling must be supported on the
Bluetooth phone and enabled by the
wireless service carrier to work. This
feature is only supported when the
vehicle is not moving.
To start a conference while in a
current call:
1. Turn and press the TUNE/MENU
knob and select Enter Number.
2. Enter the phone number and
select OK.
3. After the call has been placed,
turn the TUNE/MENU knob and
choose Merge Calls.
4. To add more callers to the
conference call, repeat Steps 1
3. The number of callers that
can be added is limited by your
wireless service carrier.
Turn and press the TUNE/MENU
knob and select Hang Up or press
Hang Up on the screen.
Press / .
During a call, all sounds from inside
the vehicle can be muted so that the
person on the other end of the call
cannot hear them.
Turn and press the TUNE/MENU
knob and select Mute Call. Press
again to cancel mute.
Audio can be transferred between
the Bluetooth system and the cell
phone.
The cell phone must be paired and
connected with the Bluetooth
system before a call can be
transferred.
During a call with the audio in the
vehicle, press the Transfer Call
button on the screen or press and
hold the / button on the
steering wheel.
Use the audio transfer feature on
the cell phone. See your cell phone
manufacturer's user guide for more
information. Press the Transfer call
button on the screen or press and
hold the / button on the
steering wheel.