Basic components
mal operation. Watch the gauge when turning
on the main switch to make sure all segments
come on.
EMU26750
Fuel flow meter
The fuel flow meter displays the amount of
fuel flow over a one hour period, at the current
rate of engine operation.
If twin engines are installed on your boat, the
fuel flow meter displays the total fuel flow of
both the port and starboard engines. It also
displays "
" (for port and starboard).
Use the "
" (set) button to rotate the fuel flow
display in the following order:
Press the "
" (set) button once to display
G
the fuel flow of the starboard engine. An " "
(for starboard) will also be displayed.
Press the "
" (set) button a second time to
G
display the fuel flow of the port engine. A " "
(for port) will also be displayed.
Press the "
" (set) button a third time to
G
return the display to the total fuel flow of
both engines. "
will also be displayed to indicate both the
port and starboard engines.
NOTE:
The fuel flow meter displays gallons/hour or
G
liters/hour according to operator prefer-
ence. Select the desired unit of measure-
ment by setting the selector switch on the
back of the gauge during installation.
22
ZMU01749
" (for port and starboard)
1. Selector switch
The fuel consumption meter and fuel econ-
G
omy meter will indicate the same unit of
measurement.
EMU26760
Fuel consumption meter
This gauge displays the total amount of fuel
consumed since the gauge was last reset.
Press the "
" (mode) button repeatedly
until the indicator on the face of the gauge
points to total "
" (total). To reset the total
fuel consumption to zero, press the "
and "
" (mode) buttons at the same time.
EMU26770
Fuel economy
This gauge displays the distance per liter or
gallon when cruising, and is only for reference
use by the operator.
Press the "
" (mode) button repeatedly
until the indicator on the face of the gauge
points to "
" (economy).
" (set)
ZMU01751