Starting The Engines - Yamaha EXCITER 270 Owner's Manual

Exciter 270 jet boat
Hide thumbs Also See for EXCITER 270:
Table of Contents

Advertisement

OPERATION

STARTING THE ENGINES

WARNING
SEVERE INJURY OR DEATH MAY
RESULT IF YOU IGNORE ANY OF
THE FOLLOWING:
● Before operating your Jet Boat,
become familiar with all controls.
Consult your Yamaha dealer
about any control or function you
do not fully understand.
● Attach the engine stop switch
lanyard to your personal flotation
device before operating. Failure
to attach lanyard could result in a
runaway boat if operator is eject-
ed.
● Check throttle, steering and shift
lever for proper operation before
starting the engine.
● Shift into neutral before starting
engines. Put throttle levers in idle
position before shifting.
3 FT (90 CM)
1) Always make sure the boat is
launched and used in waters that
are free from weeds and debris, and
at least 3 ft (90 cm) deep.
________________
WARNING
Never operate in water that is less
than 3 ft (90 cm) deep. You increase
your chance of hitting an underwa-
ter obstacle. You could be injured.
Pebbles or sand can also be sucked
into the jet (water) intake, damaging
the impeller.
CAUTION:
There is a hull drain plug at the bot-
tom of the stern in the center. Be
sure it is securely tightened before
launching the Jet Boat.
RES
2) Turn the fuel cock knob to the "ON"
position.
3-11
O
PERATION
________________
________________
OFF
3
ON

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents