Table of Contents
Advertisement
speciFications
Start Amps
400
Peak Amps
900
Battery
12 V, Lead-Acid,
Rechargeable
Charging Current = 0.18A
Booster Cables
#4 Gauge, 17" Length
Includes: 12 Volt Cigarette Lighter Charger,
AC Adapter Receptacle, Built-in Light,
Booster Cable Storage, Charge/Battery Indicators
note: Charging performance of this tool
(if charged by line voltage) may vary
depending on variations in local line
voltage. Extension cord usage may
also affect charging performance.
save this manual
You will need the manual for
the safety warnings and precautions,
assembly instructions, operating and
maintenance procedures, parts list and
diagram. Keep your invoice with this
manual. Write the invoice number on the
inside of the front cover. Keep the manual
and invoice in a safe and dry place for
future reference.
saFety warnings and
precautions
warning: when using tool, basic safety
precautions should always be followed
to reduce the risk of personal injury and
damage to equipment.
read all instructions before using this
tool!
1.
Keep work area clean. Cluttered
areas invite injuries.
2.
observe work area conditions.
Do not use machines or power tools
in damp or wet locations. Don't
expose to rain. Keep work area well
SKU 38391
For technical questions, please call 1-800-444-3353.
lighted. Do not use in the presence
of flammable gases or liquids.
3.
Keep children away. Children must
never be allowed in the work area.
Do not let them handle this product.
4.
store idle equipment. When not
in use, tools must be stored in a dry
location to inhibit rust. Always lock
up tools and keep out of reach of
children.
5.
use the right tool for the job. Do
not attempt to force a small tool or
attachment to do the work of a larger
industrial tool. There are certain
applications for which this tool was
designed. It will do the job better and
more safely at the rate for which it
was intended. Do not modify this tool
and do not use this tool for a purpose
for which it was not intended.
6.
dress properly. Do not wear
loose clothing or jewelry as they
can be caught in moving parts.
Protective, electrically non-conductive
clothes and non-skid footwear are
recommended when working. Wear
restrictive hair covering to contain
long hair.
7.
wear ansi-approved splash-
resistant safety goggles.
8.
do not overreach. Keep proper
footing and balance at all times.
9.
maintain tools with care. Keep
tools clean for better and safer
performance. Follow instructions for
lubricating and changing accessories.
Inspect tool cords periodically and, if
damaged, have them repaired by an
authorized technician. The handles
must be kept clean, dry, and free from
oil and grease at all times.
Page 2
Hide quick links:
Advertisement
Table of Contents
