Taking Images With Self-Timer; Taking Pictures/Motion Pictures With Exposure Compensation; Exposure; Auto Bracket (Pictures Only) - Panasonic LUMIX DMC-TZ65 Operating Instructions Manual

Digital camera model no. dmc-tz7; dmc-tz6; dmc-tz65
Table of Contents

Advertisement

Taking images with self-timer

Mode:
We recommend using a tripod. This is also effective for correcting jitter when pressing the
shutter button, by setting the self timer to 2 seconds.
Self-timer indicator
(Flashes for set duration)
When set to BURST, three pictures are taken. When set to the 'FLASH BURST' scene
mode, five pictures are taken.
Focus will be automatically adjusted immediately before recording if shutter button is
pressed fully here.
After self-timer lamp stops flashing, it may then be lit for AF assist lamp.
This function cannot be used in the 'UNDERWATER' and 'HI-SPEED BURST' scene
modes, or in
(MOTION PICTURE mode)
In some modes, only '2SEC.' or only '10SEC.' may be selected.
INTELLIGENT AUTO mode: '10SEC.'
CLIPBOARD mode, 'SELF PORTRAIT' scene mode: '2SEC.'
48
VQT1Z93
Display 'SELFTIMER'
Select time duration
Displayed for approx. 5 sec.
Can also be selected with ◄.
Take an image
Press fully the shutter button to start recording
after the preset time.
• To cancel while in operation
→ Press 'MENU/SET'
.
Taking pictures/motion pictures with exposure
compensation
Mode:
Corrects exposure when adequate exposure cannot be obtained (if difference between
brightness of object and background, etc.). Depending on the brightness, this may not be
possible in some cases.

EXPOSURE

Display 'EXPOSURE'
Select a value
'0' (no compensation)

AUTO BRACKET (Pictures only)

Takes 3 pictures in succession, changing the exposure. After exposure compensation, the
compensation value is as standard.
Display 'AUTO BRACKET'
Press ▲ twice to switch
'EXPOSURE' to
'AUTO BRACKET'.
Select a value
'0' (no compensation)
Value displayed after exposure compensation set
Cannot be used with flash or when there is remaining capacity for only 2 more pictures.
When 'AUTO BRACKET' is set,
is displayed on the left of the screen.
Cancelled when the power is turned off.
When AUTO BRACKET is set, 'MULTI ASPECT'
AUTO BRACKET cannot be set in 'TRANSFORM', 'PANORAMA ASSIST', 'HI-SPEED
BURST', 'FLASH BURST', 'STARRY SKY', 'PIN HOLE', and 'FILM GRAIN' scene modes.
Exposure compensation cannot be used with the 'STARRY SKY' scene mode.
EXPOSURE only
Example of exposure compensation
Over-exposed
Minus direction
Optimum exposure
Plus direction
Under-exposed
e.g. AUTO BRACKET with ±1EV
First picture
0EV
(Standard)
Second picture
-1EV
(Darker)
Third picture
+1EV
(Brighter)
and 'BURST' are cancelled.
49
VQT1Z93

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-tz6Lumix dmc-tz7

Table of Contents