Attaching The Pedestal; Installing Pedestal; Uninstalling Pedestal - Panasonic Viera TX-L24C5B Operating Instructions Manual

Attaching the Pedestal

Warning
Do not disassemble or modify the pedestal.
•
O therwise the TV may fall over and become damaged, and
personal injury may result.
Caution
Do not use any pedestal other than that
provided with this TV.
•
O therwise the TV may fall over and become damaged, and
personal injury may result.
Do not use the pedestal if it becomes warped or physically
damaged.
•
I f you use the pedestal while it is physically damaged, personal
injury may result. Contact your nearest Panasonic dealer
immediately.
During assembly, use only screws supplied and make sure
that all screws are securely tightened.
•
I f sufficient care is not taken to ensure screws are properly
tightened during assembly, the pedestal will not be strong
enough to support the TV. It might fall over and become
damaged and personal injury may result.
Ensure that the TV does not fall over.
•
I f the TV is knocked or children climb onto the pedestal with
the TV installed, the TV may fall over and personal injury may
result.
Two or more people are required to install and remove
the TV.
•
I f two or more people are not present, the TV may be
dropped, and personal injury may result.
Caution
Small object
This product contains possibly dangerous parts that
can be breathed in or swallowed by young children
accidentally
•
K eep the dangerous parts out of reach of young children.

Installing Pedestal

1. Place the LCD TV screen facing down on a flat surface place
where maintained with soft materials (such as a blanket)
for protecting the display screen.
2. Use four assembly screws to fasten the neck to the base
securely.
3. Adjusts the pedestal to the bottom of the TV.
4. Use only the supplied assembly screws to fasten the
pedestal securely to the TV.

Uninstalling Pedestal

1. Place the LCD TV screen facing down on a flat surface place
where maintained with soft materials (such as a blanket)
for protecting the display screen.
2. Remove screws in two holes with screw driver.
7