Programming
'the Remote
Contro
If you have
video
equipment
other
than Sony
brand
(or if you have
a Sony DVD/VCR
combination
unit)
that you want
to control
with
the TV's remote
control,
use the following
procedure
to program
the remote
control.
1
Check
the list of "Manufacturer's
Codes"
on page
6 and find the three-digit
code number
for the manufacturer
of your
component.
If more
than
one code number
is listed,
use the
number
listed
first.
co_ SFT
2
Press
CZ).
VCR/DVD
SAT/CABLE
3
Press
C_D or C_D FUNCTION
button
to indicate
the type of component
you want
to
program
with
the remote
control.
4
Use the (_)-_)
buttons
to enter
the three-digit
manufacturer's
code number.
ENTER
5
Press
C)"
6
To check
if the code number
works,
aim the TV's remote
control
at the component
and
press
the green
POWER
button
(VCR/DVD,
SAT/CABLE)
that corresponds
with
that
component.
If it responds,
you are done.
If not try using
another
code listed
for that
manufacturer.