Cable Box Connections - Sony FD Trinitron Wega KV-32FS210 Operating Instructions Manual

Operating Instructions
Cable Box Connections
Some cable TV systems use scrambled or encoded signals that require a cable box to view art
channels. If you subsclibe to that kind of cable sea'vice, use this connection. Scrambled signals
coming in to the TV through the cable box cannot be viewed in PIP. If some, but not art, of your
channels are scrambled, consider using the cable box and cable connection (see page 13).
W and Cable Box
Cable box
Front cable/
antenna
Rear ofT V
1
Connect the coaxial cable from your cable service to the 1N jack on yotu" cable box.
2 Connect a coaxial cable (not supplied)
from the OUT jack on your cable bo× to the
VI4Fi UI4F jack on yotu" T_
Using your W with this connection
This connection allows you to do the fonowing:
Q
Q
Progrem your Sony remote conh_)t to operate your cable box (see page 5).
_T_
To activate your remote press CZD to operete your cable box and then use the (_)-(_)
buttons or CH+i- buttons to change the channels. To do this, first progi'am yotu" remote
control, then use the Channel Fix featl_re to set yotu" TV to channel 3 or 4 (see page 31).
12