Access Codes; Configuration Settings Service - Nokia 3610 User Manual

G e n e r a l i n f o r m a t i o n
For availability of approved enhancements, please check
with your dealer. When you disconnect the power cord of
any enhancement, grasp and pull the plug, not the cord.

Access codes

To set how your phone uses the access codes, select
Menu > Settings > Security.
• Keypad lock (keyguard)
prevents accidental
keypresses:
1 To lock the keypad,
with the fold open,
select Menu > *
within 3.5 seconds.
2 To unlock the keypad,
with the fold open,
select Menu > *
within 1.5 seconds.
To answer a call when
the keypad is locked, press the call key. When you end
or reject the call, the keypad locks automatically.
You can also select Menu
Automatic keyguard or
Off. If the security keyguard is on, enter the security
code when requested.
12
Copyright © 2008 Nokia. All rights reserved.
> Settings > Phone >
Security keyguard > On or
• The security code (5-10 digits) protects your phone
against unauthorised use. You can create or change the
code; and turn this setting on or off. If you forget the
code and the phone is locked, the phone will require
service and additional charges may apply. For more
information, contact a Nokia Care point or your phone
dealer.
• The PIN code, supplied with the SIM card, protects the
card against unauthorised use.
• The PIN2 code, supplied with some SIM cards, is
required to access certain services.
• PUK and PUK2 codes may be supplied with the SIM
card. If you enter the PIN or PIN2 code incorrectly three
times in succession, you are asked for the PUK or PUK2
code. If you do not have them, contact your service
provider.
• The barring password (4 digits) is required to restrict
calls to and from your phone.
• To view or change the security module settings, if
installed, select Menu
Security module sett..

Configuration settings service

To use some of the network services, such as mobile
internet services, MMS, Nokia Xpress audio messaging, or
remote internet server synchronisation, your phone needs
the correct configuration settings. For availability, contact
> Settings > Security >