Making A Call; Ending A Call; Answering A Call; Keyguard - Nokia 6185 User Manual

Checking signal strength
When at the start screen (
see page 11
the strength of the radio signal is indicated by the
signal indicators on the left side of your phone's
display. These indicators will move up as the
strength of the signal increases and down as it
decreases.
Increasing your phone's signal may be easy. Try moving your
phone slightly, or move towards a window if you're calling
from inside a building.

Making a call

Your cellular phone does not have a dial tone. Simply enter
the phone number (including area code, as needed) and press
NORMAL POSITION: Hold the phone as you would any other telephone
with the antenna pointed up and over your shoulder.
Editing a number on display
If you make a mistake while entering a number to dial, press
to move the cursor to the left and
s
Press Clear to delete the character to the left of the cursor.
Dialing a phone number stored in the phone book
View stored names and numbers by pressing
start screen ( , then press
see page 9)
Calling card calls
See "Calling card" on page 29.
Emergency calls
See "Emergency calls" on page 36.

Ending a call

Press
Note: To clear any characters from the display, Press END again.
16
Final version 2/15/99
) or in a call,
to move it to the right.
t
or from the
t s

Answering a call

Press any key except or
If Keyguard is on (see next paragraph),
only answers calls.
Tip: You can stop your phone from
ringing without answering the call. Press
phone rings to mute the ringing.
You can still answer the call if Call or the name of the person
who is calling is still flashing on your display.
If you don't wish to answer the call, it will be forwarded to
your voice mailbox (provided you have a voice mail
subscription).

Keyguard

This feature helps to prevent accidental
key presses (e.g. when your phone is in
your pocket, in your purse) by disabling
your keypad.
If any keys are pressed while Keyguard
is activated, Press Unlock and then * will display.
Activating Keyguard
There are three different ways to activate Keyguard. Keys
locked will appear on the display when activated.
Keys locked
• Press and hold until
(not available during an active call)
Menu
• Press
Menu
• Press 9 at the start screen
Deactivating Keyguard
There are two different ways to deactivate Keyguard.
Unlock,
• Press then
Unlock keys?
• Press and hold until
OK
press
17
Final version 2/15/99
Note:
when the
appears
appears, then