Table of Contents
Advertisement
an ANSI approved dust mask and respirator when working around paint spray,
chemical dusts and mists.
8.
Do not overreach. Keep proper footing and balance at all times. Do not reach
over or across running machines.
9.
Maintain tools with care. Keep tools maintained and clean for better and
safer performance. Follow instructions for lubricating and changing accessories.
Inspect tool cords periodically and, if damaged, have them repaired by a
qualified technician. The handle must be kept clean, dry, and free from oil and
grease at all times.
10. Disconnect power. Disconnect tool from air supply when not in use.
11. Remove adjusting keys and wrenches. Check that keys and adjusting
wrenches are removed from the tool or machine work surface before connecting
it.
12. Stay alert. Watch what you are doing, use common sense. Do not operate
any tool when you are tired.
13. Check for damaged parts. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment and binding of moving
parts; any broken parts or mounting fixtures; and any other condition that may
affect proper operation. Any part that is damaged should be properly repaired
or replaced by a qualified technician. Do not use the tool if the trigger does not
operate properly.
14. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are available
from Harbor Freight Tools.
15. Do not operate tool if under the influence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, do not operate the tool.
16. WARNING: The brass components of this product contain lead, a chemical
known to the State of California to cause birth defects (or other
reproductive harm). (California Health & Safety code § 25249.5, et seq. )
17. Maintenance. For your safety, service and maintenance should be performed
regularly by a qualified technician.
18. Compressed air only. Never use compressed gas as a power source.
19. Do not spray near open flames, pilot lights, stoves, heaters, or any other
heat source. Most solvents and coatings are highly flammable, particularly
when sprayed.
SKU 92126 For technical questions, please call 1-800-444-3353.
Page 3
Hide quick links:
Advertisement
Table of Contents
