Central Pneumatic Professional 47016 Assembly And Operating Instructions Manual page 4

Air gravity spray gun, 20 ounces
Table of Contents

Advertisement

22. Do not operate Spray Gun near open flames, pilot lights, heaters, or any other
heat source. Make sure you have adequate ventilation. Most solvents and paints
are extremely flammable, especially when sprayed. Never smoke cigarettes in the
same room you are working in.
23. Read labels on cleaning solvents and paint coatings. Chlorinated solvents such as
111-Trichloroethane and Methylene Chloride (also known as methyl-chloride) can
chemically react with aluminum and may explode. Many paint sprayers contain
aluminum. Contact solvent manufacturer or paint supplier if your are in doubt.
24. Paints and solvents may be harmful or fatal if swallowed or inhaled. Always use
a respirator when spraying. Avoid prolonged skin contact with solvents or paints as
they will irritate skin. After contact, immediately wash off exposed area with hot,
soapy water.
25. Check all Spray Gun Seals and Air Connection. Before use, make sure the
Lid (#23) is fully tightened to the Cup (#19). Make sure the air hose is securely
fastened to the Gun Body (#13).
Note: Performance of the compressor (if powered by line voltage) may vary depending
on variations in local line voltage. Extension cord usage may also affect tool perfor-
mance.
Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator. Additionally, read all of
the warnings and instructions provided in the instruction manual of the air
compressor you will be using.
WARNING: This product contains or, when used, produces a chemical known to the
State of California to cause cancer and birth defects or other reproductive harm.
(California Health & Safety Code § 25249.5, et seq. )
When unpacking, check to make sure the parts listed on page 8 are included. If any parts
are missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual as soon as possible.
SKU 47016
For technical questions, please call 1-800-444-3353.
Unpacking
REV 12/05
Page 4

Advertisement

Table of Contents
loading

Table of Contents