Panasonic TX-P42GT60Y Ehelp page 63
Led tv tx-p42gt60y; tx-p50gt60y
Hide thumbs
Also See for TX-P42GT60Y:
- Operating instructions manual (48 pages) ,
- Service manual (36 pages)
Table of Contents
Advertisement
2) Set
Satellite
for the selected LNB
– Select
No Satellite
(available satellite will be searched in Auto Setup).
– Select
User defined
– If you set to
Band,
User Band Frequency
Cable router you use). For details, read the manual of the Single
Cable router.
Watching
5. Press
BACK/RETURN
6. Select
Auto Setup
7. Select
Satellite
/
access
8. Set with
/
and press
Scan Mode
●
Full:
Scans the whole frequency range.
Quick:
Scans the suitable frequency for the selected satellite.
After settings, select
●
9. The confirmation screen is displayed and press
(Settings are made automatically)
When the operation is completed, the channel at the lowest position will
●
be displayed.
■
DVB-C, DVB-T, Analogue channels
1. Select
Auto Setup
2. Set
DVB-C Auto Setup Settings
(DVB-C)
Scan Mode
●
Full:
Scans the whole frequency range.
Quick:
Scans the suitable frequency in your country.
Normally set Frequency,
●
is not displayed or if necessary, enter each value specified by your
cable provider with numeric buttons.
if you do not know the connected satellite
to set
Test Transponder Frequency
Single
Cable, additional settings are required. Set
and
Tuning and editing channels
to store
with
/
and press
Search Mode
/
Scan Mode
OK
to store
Start scan
with
with
/
and press
with
Symbol Rate
- 63 -
PIN
(depending on the Single
Selectable satellites
OK
to access
with
/
and press
/
and press
OK
OK
to start
Auto Setup
OK
to access
/
/
/
and press
and
Network ID
to Auto. If
manually.
User
OK
to
to search.
OK
to store
Auto
Advertisement
Chapters
Table of Contents
