1. Manuals
  2. Brands
  3. Central Hydraulics Manuals
  4. Mobility Aid
  5. 39178
  6. Assembly and operating instructions manual

Central Hydraulics 39178 Assembly And Operating Instructions Manual

Harbor freight tools central hydraulics series 450 lb capacity transmission jack model 39178 assembly and operating instructions
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
ASSEMBLY AND OPERATING INSTRUCTIONS
Note:
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND
ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Copyright
of this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
450 Lb. Capacity
450 Lb. Capacity
450 Lb. Capacity
450 Lb. Capacity
450 Lb. Capacity
T T T T T ransmission Jack
ransmission Jack
ransmission Jack
ransmission Jack
ransmission Jack
This tool requres a
Bar to operate (neither one included).
©
2004 by Harbor Freight Tools
39178
1
/
" Drive Ratchet or Breaker
2
®
. All rights reserved. No portion

Advertisement

Table of Contents
loading

Summary of Contents for Central Hydraulics 39178

  • Page 1 2004 by Harbor Freight Tools of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353 39178 ”...

  • Page 2: Specifications

    Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair. SKU 39178 Specifications " 4 " 2 l l a ”...
  • Page 3 Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. 15. Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs.
  • Page 4 When unpacking, check to make sure the following parts are included. (1) Jack Assembly If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. Prepare for assembly by having a clean, well lit location. You will need a small open-end or adjustable wrench (not included) to complete assembly.

  • Page 5: Operation

    This jack is designed to use only on hard, level surfaces capable of supporting the load. Use on other surfaces may cause instability and possible property damage or personal injury. SKU 39178 Operation ” Drive Ratchet or Breaker Bar (neither one included)

  • Page 6: Maintenance

    If it becomes dirty, clean it promptly with clean water or a suitable detergent. Be aware that using a pressure washer to clean it may remove some paint from the outer surface. Be sure to lubricate (outlined above) after cleaning. SKU 39178 When preparing to remove the Tie- down, have an assistant stabilize the transmission on the jack to keep it from falling.

  • Page 7: Parts List

    ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 39178 Parts List . y t Page 7 .

  • Page 8: Assembly Drawing

    Assembly Drawing SKU 39178 Page 8...

Table of Contents