How To Show The Pictures Or Diagrams Of A Multimedia Object - Standard Horizon CP300I Owner's Manual

Figure 6.0.6 - Pictures and Diagrams
The pictures or diagrams can be a MULTIMEDIA OBJECT or they can be associated to a
generic cartographic object, like a port marina.

How to show the pictures or diagrams of a Multimedia Object

They are shown on the chart page with the camera icon
Move the cursor over the camera icon. You will get the quick info on the object and there
will be the camera icon on the top bar of the window:
Figure 6.0.6a - Example of Quick Info on MULTIMEDIA object
Press [I ] on the CP300/CP300i or press [ENT] on the CP180/CP180i for 1 second to
MAGE
display the image on the screen; press [E ] on the CP300/CP300i or [ENT] on the
XPAND
CP180/CP180i to open the Full info on the object:
Figure 6.0.6b - Example of Full Info on MULTIMEDIA object
On the Full Info, there will be the small camera icon on a corner of the square containing
the object icon.
To see the picture press [MENU] when the object with a picture is highlighted.
When the picture is shown, it is possible to fit it to screen by pressing [ENT].
When the picture is shown, it is possible to change the contrast by pressing [ZOOM IN] or
[ZOOM OUT].
When the picture is shown, it is possible to display the next picture associated, if any, by
pressing the ShuttlePoint knob left or right.
GPS Chart Plotters Page 47