Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
Electric
MEAT GRINDER
REV 12c
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2008 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
ITEM 99598
Advertisement
Table of Contents
Related Manuals for Harbor Freight Tools 99598
Summary of Contents for Harbor Freight Tools 99598
- Page 1 2008 by Harbor Freight Tools No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.
-
Page 2: Important Safeguards
9. Do not let cord hang over edge of table or counter. 10. Do not let cord contact hot surface, including stove. 11. Do not use fingers to scrape food away from discharge disc while appliance is operating. Cut type injury may result. Item 99598... -
Page 3: Work Area Safety
1. Before every use, thoroughly clean the appliance (see “Cleaning” section for instructions) EXCEPT for those parts that do not touch foods. Then wash your hands. Item 99598 For technical questions, please call 1-800-444-3353. 3. Extreme caution must be used when moving appliance. -
Page 4: General Safety
1 Feed Stick 1 Stainless Steel Cutting Blade Accessories 3 Cutting Plates 1 4-Piece Sausage Stuffing Kit 1 2-Piece Kubbe Attachment HOUSEHOLD USE ONLY Item 99598... - Page 5 Cutting Blade face front of housing. CAUTION! Cutting Blade is sharp. Wear gloves and use care when installing Cutting Blade. REV 12c Item 99598 For technical questions, please call 1-800-444-3353. 4. After washing and drying, apply a small amount of salad oil (not included) to Cutting Plates to keep them lubricated.
-
Page 6: Cleaning, Maintenance, And Lubrication
Remove clog. d. Wash washable parts in warm, soapy water. e. Dry parts and reassemble them. WARNING! If the supply cord of this appliance is damaged, it must be replaced only by a qualified service technician. REV 12c Item 99598... -
Page 7: Parts List And Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 99598 For technical questions, please call 1-800-444-3353. Part... -
Page 8: Please Read The Following Carefully
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.