[Stabilizer] - Panasonic LUMIX DMC-FX33 Operating Instructions Manual

[STABILIZER]

Detecting jitter and compensating
for it
Press [ ] to display the [REC] mode menu
MENU
/SET
and select the item to set.
[MODE1] The stabilizer operates
( ) continuously and can assist
during photo composition.
[MODE2] The jitter is compensated for
( ) when the shutter button is
pressed. There is a greater
stabilizing effect.
[OFF] When the stabilizer is not
( ) desired.
∫ About the jitter/movement detection
demonstration screen
Press [DISPLAY] to display [JITTER, SUBJ.
MOVE DEMO] when the [STABILIZER]
screen is displayed. (Pictures cannot be
recorded when the [JITTER, SUBJ. MOVE
DEMO] screen appears.)
Press [DISPLAY] again to finish this mode.
A Jitter detection demonstration
B Movement detection demonstration
Advanced (Recording pictures)
(P75)
A
B
- 85 -
• It is also possible to display this screen using
the quick setting (P76).
• The camera automatically detects the jitter
and the movement of the subject and
displays these on the indicator.
• We recommend using a bright subject with
high contrast for the subject movement
demonstration.
• The jitter/movement detection demonstration
screen is an approximation.
• The camera uses movement detection when
automatically setting the ISO sensitivity in
the following cases.
– In intelligent auto mode [
– In [SPORTS], [BABY1]/[BABY2] and [PET]
in scene mode
– When [INTELLIGENT ISO] is set
• The stabilizer function may not be effective
in the following cases.
– When there is a lot of jitter.
– When the zoom magnification is high.
– In digital zoom range.
– When taking pictures while following a
moving subject.
– When the shutter speed becomes slower
to take pictures indoors or in dark places.
Be careful of camera jitter when you press
the shutter button.
• The setting is fixed to [MODE2] with
[SELF PORTRAIT] in scene mode and to
[OFF] in [STARRY SKY] in scene mode.
• You cannot be set to [OFF] in the intelligent
auto mode [ ].
• In motion picture mode [
cannot be set.
]
], [MODE2]