Table of Contents
Advertisement
Quick Links
18 VDC - IMPACT DRIVER
ASSEMBLY AND OPERATING INSTRUCTIONS
Visit our Web site at http://www.harborfreight.com
Copyright © 2006 by Harbor Freight Tools
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
Due to continuing improvements, actual product may
differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
94371
®
. All rights reserved. No portion of this
Advertisement
Table of Contents
Related Manuals for Drill Master 94371
Summary of Contents for Drill Master 94371
- Page 1 Copyright © 2006 by Harbor Freight Tools manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353 94371 ®...
-
Page 2: Specifications
Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair. SKU 94371 For technical questions, please call 1-800-444-3353 Specifications D e s c rip tio n 1 8 V D C , 1 .3 A H , N i-C d ty p e... - Page 3 Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. 15. Do not operate tool if under the influence of alcohol or drugs. Read warning labels if taking prescription medicine to determine if your judgment or reflexes are impaired while taking drugs.
-
Page 4: Battery Precautions
12. Recharge the battery monthly even if not used. 13. Always remove the battery from the Impact Driver before performing inspection, maintenance, cleaning procedures, or storage. 14. Caution: Never charge Battery for more than 5 hours continuously. Charger Adapter should not be left plugged in or charging for more than 5 hours. -
Page 5: Operation
When unpacking, check to make sure the following parts are included: Impact Driver, Battery, Charger Base, and Charger Adapter. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. - Page 6 Push the Forward/Reverse Button (31) to the center position to lock the Switch in the Off position. Insert Battery into the receptacle at the handle-bottom of the Impact Driver. Secure the Lock-spring Clasps to each side of the handle. SCREWDRIVER Insert a hex screwdriver bit (not provided) into the Chuck.
-
Page 7: Troubleshooting
Recharge battery monthly when not in use to maintain battery life. When the battery is spent it will need to be properly disposed of. Harbor Freight Tools offers a no-cost battery recycling program; for details, call 1-800-444-3353. Using a rag and light oil, wipe bits and other steel parts to keep them from rusting. -
Page 8: Parts List
Radiator Wire (Red) “+” Wire (Black) “-” NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 94371 For technical questions, please call 1-800-444-3353 Parts List Part Description Wire (Red) “+”... -
Page 9: Assembly Drawing
LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 94371 Page 9 For technical questions, please call 1-800-444-3353...