Making The Connections; Getting Started - Panasonic SC-AK640 Operating Instructions Manual

Getting started

Step 1 Step 1

- Making the connections

- Making the connections
Connect the AC power supply cord only after all other connections have been made.
5
Connect the AC power supply cord.
Insertion of connector
Even when the connector is perfectly inserted, depending on
the type of inlet used, the front part of the connector may jut
out as shown in the drawing. However there is no problem
using the unit.
Appliance inlet
If the power plug does not fi t your socket, use the power plug
adaptor (included).
For your reference
To save power when the unit is not to be used for a long time,
unplug it from the household AC outlet. You will need to reset
some memory items after plugging in the unit.
Note:
The included AC power supply cord is for use with this unit only.
Do not use it with other equipment.
(R)
4
Voltage selector.
Use a fl at-head screwdriver to set the voltage
selector on the rear panel to the appropriate
position for the area in which this system is used.
4
RQT8043
Connector
To household AC outlet
1
Connect the AM loop antenna.
Stand the antenna
up on its base.
2
Connect the FM indoor antenna.
Tape the antenna where reception is best.
(L)
3
Connect the speaker cords.
Red
Grey
Gray
Connect the left
(L) side in the
same way
Blue (–)
Black
Blue
Adhesive
tape
Subwoofer
Red (+)
Black (–)
Red (+)
Grey (+)
Black (–)
(SB-WAK640)