Screen Size Adjustment - Sanyo PDG-DXL2000 Owner's Manual

Computer Input
This projector has the picture screen resize function, which
enables you to customize the image size.
Press the MENU button to display the On-Screen
1
Menu. Use the Point
then press the Point
2
Use the Point
then press the SELECT button .
Normal
Provide the image to fit the screen size while maintaining
the aspect ratio of input signal.
Full
Provide the full screen image.
Wide (16:9)
Provide the image at the 16:9 wide screen ratio.
Zoom
Scale the image proportionally to fit the entire screen. Either
side of image may go over the screen.
True
Provide the image in its original size. When the original
image size is larger than the screen size (1024 x 768), the
projector automatically switches to the panning mode. Use
the Point buttons to pan the image. When adjusted,
the arrows turn red. When reached to the correction limit,
the arrows disappear.
Custom
Provide the last stored aspect screen image.
Note:
• This projector can not display any resolution higher than 1920 x 1200. If your computer's resolution is higher
than that, lower the resolution before connecting to the projector.
• The image data other than 1024 x 768 is modified to fit the screen size in initial mode.
• True and Digital zoom +/– can not be selected when 480i, 575i, 480p, or 575p is selected in the PC System
Menu (p.32).
• Zoom and Image Position Adjustment (p.25) will be canceled when Custom is selected in the Screen menu.
38

Screen Size Adjustment

buttons to select Screen and
or the SELECT button.
buttons select the desired item and
Screen Menu