Starting Play From A Desired Track In A Desired Album; Title Search Function - Panasonic SC-AK520 Operating Instructions Manual

Starting play from a desired track in a
desired album
Remote control only
Preparation: Press [:/J, CD] and then [L, CLEAR].
1
Press [ALBUM ( or
buttons to select the album.
To select album 10 or over, press [X10] once then the two digits.
To select album 100 or over, press [X10] twice then the three digits.
Play starts from the first track of the selected album.
2
Press the numbered buttons to select the track in the
current album.
To select track 10 or over, press [X10] once then the two digits.
To select track 100 or over, press [X10] twice then the three digits.
Play starts from the selected track.

Title search function

You can search for your desired album/track with its keyword (part of
the title).
Album title search
Preparation: Press [:/J, CD] and then [L, STOP].
AK520 : Main unit and remote control
AK320 : Remote control only
1
Press [TITLE SEARCH] once.
2
Enter the characters of the keyword for the album
title.
(A see right: "Entering characters")
3
Press [ENTER].
Album title search starts.
AK520
Blinks to indicate album title search mode
Matched album title
AK320
Matched album title
Blinks to indicate album title search mode
To show the matched album title again (
Press [ENTER].
To show the next/previous album title search result
Press [f, 4/FF] (next) or [ g, REW/3] (previous) on the
remote control.
(Main unit : Push
AK520 only
CURSOR]) (next) or left ([g,
CURSOR]) (previous). (You can also
press [ g/REW/3] or [f/FF/4].))
Press [ : / J, CD ] to start play from the album found.
Play starts from the first track of the album.
(Title search mode is cancelled.)
To cancel partway through
L
Press [ , STOP].
When there is no match for the searched keyword, the display shows
"NOT FOUND".
Note
You cannot use title search function in program mode.
)] and then the numbered
=
AK320 only
)
the joystick right ([f,
T rack title search
Preparation: Press [:/J, CD] and then [L, STOP].
AK520 : Main unit and remote control
AK320 : Remote control only
1
Press [TITLE SEARCH] twice.
2
Enter the characters of the keyword for the track title.
(A see below: "Entering characters")
3
Press [ENTER].
Track title search starts.
AK520
Blinks to indicate track title search mode
Matched track title
AK320
Matched track title
Blinks to indicate track title search mode
To show the matched track title again (
Press [ENTER].
To show the next/previous track title search result
Press [f, 4/FF] (next) or [ g, REW/3] (previous) on the
remote control.
(Main unit : Push
AK520 only
CURSOR]) (next) or left ([g,
CURSOR]) (previous). (You can also
press [ g/REW/3] or [f/FF/4].))
Press [ :/J, CD ] to start play from the track found.
(Title search mode is cancelled.)
To cancel partway through
L
Press [ , STOP].
When there is no match for the searched keyword, the display shows
"NOT FOUND".
Note
You cannot use title search function in program mode.
Entering characters
You can enter keyword of up to 8 characters for album/track title search.
You can only enter upper case letters but the unit also searches for
lower case.
On the remote control
1 1 1 1
1
Press the numbered button to select the required character.
Characters allocated to the numbered buttons:
Numbered Characters
buttons
1 1
2 A B C 2
3 D E F 3
4 G H I 4
5 J K L 5
10
: space !"#$ %&'() +,– ./:;<= > ?_ `
AK520
: space !"#$ %&'() +,– ./:; = ?_ `
AK320
For AK320 , you can search for " < " or " > " by entering " ( " or " ) ".
The characters change each time a numbered button is pressed.
For example, every time you press [2]:
A B C 2
(Continued on next page)
=
)
AK320 only
the joystick right ([f,
Numbered Characters
buttons
6 M N O 6
7 P Q R S 7
8 T U V 8
9 W X Y Z 9
0 0
13
RQT7336