Multi Film Bracket - Panasonic Lumix DMC-G10K Operating Instructions Manual

Advanced (Recording pictures)
It will take pictures changing the type of film in accordance with the setting every time the
shutter button is pressed. (Up to 3 pictures)
Press 2/1 to select [MULTI FILM].
Select either [MULTI FILM 1], [MULTI FILM 2], or
[MULTI FILM 3] with 3/4, and then select the film
to be set for each with 2/1.
•
You can also use the rear dial to set.
•
[OFF] can be selected only for [MULTI FILM 3].
Press [MENU/SET] to set.
Press [MENU/SET] to close the menu.
•
You can also press the shutter button halfway to close the menu.
Focus on the subject and take a picture.
•
It will continuously take pictures by keeping the shutter button pressed when it is set to
burst mode. (Up to 3 pictures)
•
When using a self-timer, up to 3 pictures with set film will be taken if the shutter button is
pressed. (It will operate same as [
•
Multi film indication ([
amount are taken.
Note
•
[STANDARD] is registered in [MULTI FILM 1], [MULTI FILM 2] and [OFF] is registered in
[MULTI FILM 3] at the time of purchase.
•
White Balance Bracket will be disabled when the Multi Film Bracket is set.
•
Motion pictures are recorded with the settings for the [MULTI FILM 1] setting.
84
VQT2S74

Multi Film Bracket

] even if it is set to [
]) displayed on the screen will flash until all pictures of preset
].)