Sound Quality/Sound Field; Other Functions; Auto-Off Function; Setting The Time - Panasonic SC-AK220 Operating Instructions Manual

Sound quality/sound field

DISP, –DEMO
SUPER
SOUND EQ
PRESET EQ
[, REC
AUX
AUTO OFF
SLEEP
SHIFT
S.SOUND EQ
Using the built-in sound quality/sound
field settings
Press [PRESET EQ] to select a setting.
Every time you press the button:
HEAVY SOFT
HEAVY (sound quality) : Adds punch to rock
SOFT (sound quality) : For background music
CLEAR (sound quality): Clarifies higher sounds
DISCO (sound field)
LIVE (sound field)
HALL (sound field)
Note
You cannot use PRESET EQ and SUPER SOUND EQ together.
Enhancing the sound quality
You can enhance the bass and treble effect of the sound.
Press [SUPER SOUND EQ].
Remote control: Press [S.SOUND EQ].
The button light comes on.
Press the button again to cancel.
The button light goes out.
12
RQT7533
Headphones
(not included)
PHONES
VOLUME
DIMMER
CLOCK/TIMER
g
, REW/3,
f
, 4/FF
MUTING
CLEAR DISCO LIVE
EQ-OFF
(cancelled)
: Produces sound with the same kind of
lengthy reverberations heard at a disco
: Makes vocals more alive
: Adds an expansiveness to the sound to
produce the atmosphere of a great concert
hall

Other functions

Auto-off function

Remote control only
When CD or tape is selected as the source
To save power, the unit turns off if it is left unused for ten minutes.
This function does not work if the source is tuner or AUX.
Press [SHIFT] + [AUTO OFF].
"AUTO OFF" is shown on the display.
The setting is maintained even if the unit is turned off.
If you select tuner or AUX as the source, "AUTO OFF" goes out. It
comes on again when you select CD or tape.
To cancel
Press [SHIFT] + [AUTO OFF] again.

Setting the time

Remote control only
PL
: This is a 12-hour clock.
GCP
: This is a 24-hour clock.
1
Switch on the power.
2
Press [SHIFT] + [CLOCK/TIMER] to select "CLOCK".
Every time you press the button:
CLOCK
Previous display
3
(Within 7 seconds or so)
Press [g, REW/3] or [f, 4/FF] to set the time.
4
Press [SHIFT] + [CLOCK/TIMER] to finish setting the
time.
The display will return to whatever was displayed before you set
the time.
To display the time
Press [SHIFT] + [CLOCK/TIMER] once when the unit is on or at
standby mode.
The time is shown for about 5 seconds.
Note
HALL
Reset the clock regularly to maintain accuracy.
PLAY REC