Getting Started; Viewing What Has Been Recorded - Panasonic NV-MX2 Operating Instructions Manual

1
2
3
2
CAMERA
4,5,6
VCR
CARD.P.B
, ,
3 5 7
MODE
ON
OFF
4
6

Getting Started

1
Charge the Battery.
≥Attach the Battery to the AC Adaptor.
≥Connect the AC Mains Lead. (Charging starts.)
≥When the Charge Lamp [CHARGE] goes off, the Battery is fully
charged.
2
Attach the Charged Battery to the Movie Camera.
3
Insert the Cassette.
≥Slide the
Compartment Cover.
1
≥Insert the Cassette.
OPEN/EJECT ≥Press the [PUSH CLOSE] mark
≥Close the Lower Compartment Cover.
4
Turn the Movie Camera on and start recording.
≥Set the
≥Press the
≥Press the

Viewing What Has Been Recorded

5
Switch to the VCR Mode, rewind the tape, and play the tape
back.
≥Set the
≥Push the
≥Push the
≥Push the
6
Turn the Movie Camera off.
≥Set the
l
( 10)
l
( 11)
1
Lever to the right and pull down to open the Cassette
2
3
Switch to [ON]. (The [CAMERA] Lamp lights up.)
4
Button. (Recording starts.)
4
Button again to pause the recording.
l
( 27)
5
Switch to [ON]. (The [VCR] Lamp lights up.)
6
Lever towards [6]. (Rewind the tape.)
6
Lever towards [1]. (Playback starts.)
6
Lever towards [∫]. (Playback stops.)
l
(
7
Switch to [OFF].
l
( 10)
to load the Cassette.
l
( 12, 18)
12)
5