Samsung WA456 Series User Manual page 20

Top-loading washing machine
Hide thumbs Also See for WA456 Series:
Table of Contents

Advertisement

washing a load of laundry
Temperature
3
selection button
spin selection
4
button
soil level
5
selection button
select Cycle
6
Option
start/pause
7
selection button
my Cycle button
8
power button
9
20_ washing a load of laundry
Press the button repeatedly to cycle through the different water temperature
options.
hot - Whites and heavily soiled, colorfast items.
Warm - Colorfast items.
Eco Warm - Moderately soiled, colorfast items; most wrinkle-free items.
Cold - Brightly colored, very lightly soiled items.
Tap Cold - Cold water with no warm water added.
 If you select the Tap Cold option, all the lamps for the water
temperature options are turned off.
Press the button repeatedly to cycle through the different spin speed options.
high - Use for underwear, t-shirts, jeans, and sturdy cottons.
Medium - Use for jeans, wrinkle-free or wash-and-wear items, and
synthetics.
Low - Use for delicate items needing a slow spin speed.
no Spin - Drains your washer without spinning. Use for extremely delicate
items that cannot tolerate any spin.
Press the button to select the soil level/washing time.
heavy - For heavily soiled loads.
normal - For moderately soiled loads. This setting is best for most loads.
Light - For lightly soiled loads.
Press these buttons to select different cycle options.
Delay Start - Delay the start of any cycle for up to 19 hours in one-hour
increments. Displayed hour indicates the time the wash will be started.
Eco Plus – To increase your energy savings on your wash cycles. (Less hot
water consumption)
Pre Soak - Remove stains more thoroughly by specifying additional time.
PowerJet™ – Improves the washing & rinsing performance using falling
water
Smart Check - Use this function to check if the washing machine is out of
order using your smart phone when the washing machine malfunctions. This
function is set if you press and hold the PowerJet™ key for 3 seconds when
an error occurs or if you don't push any buttons when the power is on.
Press to pause and restart cycles.
Press and hold for 3 seconds to Save. Create and/or use a cycle you create
with customized temperature, spin, soil level, option, etc.
Press once to turn your washer on. Press again to turn your washer off. If
the washer is left on for more than 10 minutes without any buttons being
touched, the power automatically turns off.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wa406 series

Table of Contents