Changing The Brightness - Samsung SPH-I325 ACE User Manual

Changing the Display Time-Out
Select the length of time the display stays on.
1.
From standby mode, press
Management > Display time out
During standby, the device goes into sleep mode
after a specified period of time to conserve power.
Choose ,
Never 10 seconds
, ,
1 minute 2 minutes 5 minutes
2.
Press the navigation key left or right to select a new
time-out setting and press

Changing the Brightness

Adjust your screen's brightness to suit your
surroundings.
1.
From standby mode, press
Management > Display brightness
Adjust the brightness level for the display.
Choose Level 1 - Level 5.
2.
Press the navigation key left or right to select a new
level setting and press
Start > Settings > Power
.
, ,
15 seconds 30 seconds
, or .
10 minutes
(left softkey).
Done
Start > Settings > Power
.
(left softkey).
Done
Changing the Keypad Backlight Time-Out
Select the length of time the keypad backlight stays on
when you do not use the keys.
1.
From standby mode, press
Management > Keypad backlight time out
Choose
1 second
, , or
5 seconds 10 seconds
2.
Press the navigation key left or right to select a new
time-out setting and press
Restricting the Keypad Backlight Time-Out
By default, the keypad backlight time-out is enabled all
the time. With this setting you can restrict the time of
day that the keypad backlight time-out will be enabled.
For example, if you were planning a day at the beach
(when you would not need the keypad backlight), you
could disable the backlight time-out for that period.
1.
From standby mode, press
Management > Keypad backlight on
Section 2B. Your Device's Settings
Start > Settings > Power
.
, , ,
2 seconds 3 seconds 4 seconds
.
Done (left softkey).
Start > Settings > Power
.
,
47