Answering A Call; Handsfree Talking; Muting; Making Internal Calls - Gigaset C35 Operating Instructions Manual

Answering a call

The handset indicates an incoming call in
three ways: it rings, there is a display on
the screen and the handsfree key d
flashes.
You can take the call in the following
ways:
¤
Press the talk key c.
¤
Press the handsfree key d.
If the handset is in the charging cradle and
the function is activated
Auto Answer
(page 14), the handset will take a call
automatically when you lift it out of the
cradle.

Handsfree talking

With handsfree talking, instead of holding
the handset to your ear you can put it
down, e.g. on the table in front of you, to
allow others to listen and speak to the
caller.
Activating/deactivating handsfree
Activating while dialling
~ d
Enter the number and press
the handsfree key.
¤
You should inform your caller before
you use the handsfree function so that
they know someone else is listening.
Switching between earpiece and
handsfree mode
d
Press the handsfree key.
Switch handsfree on and off during a call.
If you wish to place the handset in the
charging cradle during a call:
¤
Press the handsfree key d and hold it
while placing the handset in the base.
If handsfree key d does not light up,
press the key again.
To find out how to adjust the volume, see
page 14.

Muting

You can deactivate the microphone in
your handset during an external call.
Muting the handset
Press the control key.
§INT§
Cancelling muting
a
Briefly press the end call key.

Making internal calls

Internal calls to other handsets registered
on the same base are free.
Calling a specific handset
Open list of internal users.
INT
Your own handset is indicated
by <.
s c
Select a handset and press the
talk key.
Or:
~
Enter the number of the hand-
set, e.g. 2.
Calling all handsets ("group call")
Open list of internal users.
INT
P
Press the star key. All handsets
are called.
End call
a
Press the end call key.
Making calls
9