Table of Contents
Advertisement
Product Description
Product
Product
Description
Description
Description
Product
Product
Description
Maxtor hard disk drives are 1-inch high, 3.5-inch diameter random access storage devices which incorporate an
on-board Ultra ATA/100 interface controller. High capacity is achieved by a balanced combination of high areal
recording density and the latest data encoding and servo techniques.
Maxtor's latest advancements in electronic packaging and integration methods have lowered the drive's power
consumption and increased its reliability. Advanced giant magneto-resistive read/write heads and a state-of-the-art
head/disk assembly - using an integrated motor/spindle design - allow up to four disks in a 3.5-inch package.
Exceptionally high data transfer rates, 5400 RPM spin speed and 11 ms access times make these capacity-class disk
drives especially well-suited to general desktop storage applications.
Key Features
Key Features
Key Features
Key Features
Key Features
ANSI ATA-5/6 compliant PIO Mode 5 interface (Enhanced IDE)
Supports Ultra DMA Mode 5 for up to 100 MBytes/sec data transfers
2 MB buffer with multi-adaptive cache manager
5400 RPM spin speed
11 ms seek time
Zone density and I.D.-less recording
Outstanding shock resistance at 300 Gs
High durability with 50K contact start/stop cycles
Advanced multi-burst on-the-fly Error Correction Code (ECC)
Extended data integrity with ECC protected data and fault tolerant servo synchronization fields
Supports EPA Energy Star Standards (Green PC Friendly) with ATA powering savings commands
Auto park and lock actuator mechanism
Low power consumption
S.M.A.R.T. Capability
Note: GB means 1 billion bytes. Total accessible capacity varies depending on operating environment.
PRODUCT DESCRIPTION
SECTION 2
2 – 1
Advertisement
Table of Contents
