Samsung SGH-L878 User Manual page 105

USB
Control how your device behaves when you
connect it to a PC.
• USB connection mode: set to PC Studio
(when using PC Studio to sync files), Mass
storage (when using a memory card to
transfer files), Image transfer (when printing
images), or Media transfer (when
transferring media files)
• Ask on connection: set to ask on
connection when you connect to a PC
Destinations
Control access point connections, passwords,
and homepages.
• Connection name: set a name for the
access point connection
• Data bearer: set a data transmission type
• Access point name: set the web address
for the access point
• User name: set a user name
100
• Prompt password: set to ask for a
password when you connect to the access
point
• Password: set a password for the access
point
• Authentication: set an authentication mode
• Homepage: set a homepage for access
points that connect to web services
• Use access point: set to ask for your
confirmation when you use the access point
You can also define advanced settings for
access points: press <Options> → Advanced
settings.
• Network type: set a network type (IPv6 or
IPv4)
• Phone IP address (IPv4 only): set the IP
address of your device
• DNS addresses (IPv4): set primary and
secondary domain name server (DNS)
addresses or set to 0.0.0.0 for automatic
detection