Table of Contents
Advertisement
4
When the battery is fully charged (the battery icon is no
longer moving), unplug the travel adapter from the device
and then from the power outlet.
Do not remove the battery before removing the travel
adapter. Doing this may cause damage to the device.
To save energy, unplug the travel adapter when not in
use. The travel adapter does not have a power switch,
so you must unplug the travel adapter from the outlet
to interrupt the power supply. The travel adapter should
remain close to the socket when in use.
›
Charge with the PC data cable
Before charging, ensure that your PC is turned on.
1
Open the cover to the multifunction jack on the top of the
device.
2
Plug one end (micro-USB) of the PC data cable into the
multifunction jack.
3
Plug the other end of the PC data cable into a USB port on
a PC.
Depending on the type of PC data cable you are using,
it may take some time before charging begins.
4
When the battery is fully charged (the battery icon is no
longer moving), unplug the PC data cable from the device
and then from the PC.
Assembling
13
Advertisement
Table of Contents
