Table of Contents
Advertisement
I5800D Apollo.book Page 104 Monday, May 16, 2011 2:34 PM
Power saving mode: Activate power saving mode. In Power
•
saving mode, the phone saves power by adjusting the white
balance on the display and the brightness level.
Location and security
You can change the settings that secure your phone, the
SIM card, and the GPS functionality.
Use wireless networks: Set the phone to use wireless
•
networking for checking locations, if it is supported in an
application.
Use GPS satellites: Enable GPS functionality for checking
•
locations, if supported in an application. You can view locations at
street level using the GPS.
Use sensor aiding: Set to use sensors to enhance pedestrian
•
positioning when the GPS signal is obstructed. There may be
variations between the sensor estimates and your actual location.
Set screen lock: Set an unlock security code to a security
•
pattern, PIN, or password. When you have set your security
code, this option changes to Change screen lock. Set it to None
to disable the security code. For more information, refer to
"Protecting your phone" on page 31.
Set up SIM card lock:
•
• Lock SIM card: Activate or deactivate the PIN lock feature,
which requires that the PIN be entered before the phone is
used.
• Change SIM PIN: Change the PIN used to access SIM
data.
Mobile tracker: Activate or deactivate the mobile tracker feature
•
which helps you to locate your phone when it is lost or stolen. For
more information, refer to "Activate the mobile tracker" on
page 33.
Set mobile tracker: When you activate the mobile tracker, you
•
can customize the following settings:
Settings
104
Advertisement
Table of Contents
