Download Print this page

CHICAGO Welding 95343 Set Up And Operating Instructions

3/8” rotary spot weld cutter

Download this manual

" ROTARY SPOT WELD

SET UP AnD OPERATing inSTRUCTiOnS

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE ThiS MAnUAL.

2006 by Harbor Freight Tools

contained herein may be reproduced in any shape or form without the express written consent of

Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein. Tools required for

assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Manual Revised 10d

CUTTER

Model

95343

Page 1 Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
Page 2: Specifications
Use safety equipment. protection. Dust mask, nonskid safety shoes, SKU 95343 For technical questions, please call 1-800-444-3353. Always wear eye hard hat, or hearing protection must be used for appropriate conditions. Always wear ANSI-...
Page 3 UnPACKing When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Page 4: Parts List
TeCHNICIANS, AND NOT BY THe BUYeR. THe BUYeR ASSUMeS ALL RISK AND LIABILITY ARISING OUT OF HIS OR HeR RePAIRS TO THe ORIGINAL PRODUCT OR RePLACeMeNT PARTS THeReTO, OR ARISING OUT OF HIS OR HeR INSTALLATION OF RePLACeMeNT PARTS THeReTO. SKU 95343 For technical questions, please call 1-800-444-3353. PARTS LiST...