Voice Commands - Vauxhall Combo 2014 Owner's Manual

Voice commands

Note
When the vehicle is stationary, all
voice commands are available
within the current menu.
While driving, the list of available
voice commands is reduced, for
safety reasons.
If the SETTINGS menu is activated
during driving, it can only be
operated using voice commands.
Phone voice commands
To access the phone voice
commands menu:
1. Press s and wait for the audible
signal.
2. Say "Telephone".
The following list of recognised voice
commands can then be used:
■ Call
■ Dial
■ Redial
■ Call back
To call a phonebook contact:
1. Press s and say "Telephone".
2. Say "Call".
3. Say the contact name, e.g.
"Mark".
4. If prompted by a system
message, specify "Work",
"Home", "Mobile" or "Other".
5. A system message will ask you to
confirm your choice.
Say "Yes" to confirm or say "No"
to cancel the operation.
6. Say "Call" to start the dialling
process.
If the specific phone number for the
contact is not recognised, the system
will display a suggestion. Say "Next"
or "Previous" to show other phone
numbers for this contact.
When the correct phone number is
shown on the display, say "Call" to
start the dialling process.
To dial a phone number:
1. Press s and say "Telephone".
2. Say "Dial".
Voice recognition
3. After the system message, enter
the desired phone number using
the following voice commands:
◆ Say "Zero" (inserts the numeral
0).
◆ Say "One" through to "Nine"
(inserts numerals 1 - 9).
◆ Say "Plus" (inserts the +
symbol).
◆ Say "Star" (inserts the *
symbol).
◆ Say "Hash" (inserts the #
symbol).
4. The phone number is repeated by
the system and also shown on the
display.
(Say "Repeat" to repeat the
telephone number entered and
recognised by the Handsfree
system).
5. Check the phone number entered
is correct and modify it if
necessary.
41