Table of Contents
Advertisement
3. Align the focus mark or the optical viewfinder
center on the subject you want to capture.
Press the Shutter button halfway to set
the
exposure
automatically
highlights the auto focus mark in blue from
one of the nine available focus points, which
it will use to determine the focus.
NOTE:
•
(Single picture) mode is the default setting.
• The icon
will appear when the shutter speed is slow, which reminds you
to hold the camera steady or use a tripod.
• The LCD screen will show you the aperture value and the shutter speed at
which you take the picture.
• The camera is always ready to take pictures or videos even if you are in the
Menu or Playback mode. Pressing the Shutter button half way in either the
menu or playback modes will quickly switch the camera to the capture or
video mode (depending on where the Mode Dial is set).
• When the red focus mark appears on the LCD screen, there is difficulty in
focusing the subject. Release the Shutter button, recompose the scene
and press the Shutter button halfway to reset the focus.
4. Hold the camera steady. Press the Shutter button completely down
to take a picture.
5. If the Quickview is set to 2 Sec or 10 Sec, the picture just taken will
be shown on the LCD screen (it is turned on) for 2 seconds or 10
second.
The Flash Charge LED (if the Flash is used) will blink, which indicates
the camera is processing the picture and is charging the Flash. You can
take the next picture only when the Flash Charge LED stop blinking.
Polaroid PDC 6350 Digital Camera User Guide
www.polaroid-digital.com
and
focus.
The
detects
the
subject
Focus Mark
camera
and
27
Advertisement
Table of Contents
