Table of Contents
Advertisement
3 Taking and Managing the Pictures
• Taking a Picture
1. Turn on the camera.
2. Set the camera to
mode or
3. Frame your subject using the camera
viewfinder or the LCD screen.
4. Press the shutter button to take a
picture. Hold the camera steady. Two
beeps sound when the picture has
been taken.
NOTE:
Capture always ready" capability lets you snap a picture in any camera
"
function setting (except when camera is in the Video Mode). You can take a
picture almost anytime the camera is on, no matter what is showing on the
LCD screen.
Outdoor Pictures
Take pictures at approximately 3 feet (1 meter) to infinity.
•
Avoid intense sunlight that may cause sun spots in pictures.
•
Always make sure that the sun or other light source is behind the
person taking the pictures.
Polaroid PhotoMAX PDC 1050 Digital Camera User Guide
12
PDC 1050 US UM.indd
Shutter Button
mode.
2X
www.polaroid-digital.com
12-13
Indoor Pictures
• Setting Flash Mode
The Flash Range is approximately 3 to 6 feet (1 to 2 meters).
1. Turn on the camera.
2. Set the camera to
mode.
3. Press button to cycle through the Flash Mode until the one you want
is shown on the LCD screen.
Flash Mode on, the flash fires for every picture. Use this setting in
high-contrast situations to provide fill-light or use it indoors in low
light.
Flash Mode off, the flash does not fire. Use this setting for outdoor
pictures or where flash is prohibited or may be distracting. Also use
when shooting toward a reflective surface, such as a window or
mirror. If you do not have enough light when using this setting, your
pictures will be too dark.
Auto Flash Mode, the flash fires automatically as needed. Use this
A
setting to take most pictures.
Polaroid PhotoMAX PDC 1050 Digital Camera User Guide
www.polaroid-digital.com
9/13/02, 6:06 PM
13
Advertisement
Table of Contents
