Gigaset SE551 WLAN dsl/cable Practical Tips page 80

ì
Select Internet Protocol (TCP/IP) and click Properties.
ì
Select Use the following IP address.
ì
Enter the IP address for the PC in the IP address box. Please bear in mind the infor-
mation on page 72.
Note:
If your PC has already been configured with a static IP address and you now need
a dynamic one, select Obtain an IP address automatically. Then no further
information will be required.
ì
Enter the subnet mask 255.255.255.0 in the Subnet mask box.
ì
Enter the IP address for the router in the Standard-Gateway box.
Note:
A gateway acts as a bridge between two networks with a different architecture. In
our case this is the Gigaset Router between the local TCP/IP network and the WAN
Defining IP addresses
79