Table of Contents
Advertisement
Questions and answers
Question
Nothing appears in
the display.
No radio link to base
–
*--*--* appears in the
display.
The caller's telephone
number is not dis-
played although CLIP
is set (see page 6).
The answering
machines does not
record any messages
or announcements.
No time given with
the answering
machine message.
Service (Customer Care)
You have access to straightforward support concerning technical aspects of
your device and how to operate it through our Online Support on the Internet:
www.siemens-mobile.com/customercare
If you have any trouble with the equipment, please contact the Siemens
telephone service:
United Kingdom
Ireland
Siemens Service is only available for device faults. Your specialist dealer will
be able to help you with any questions about operating your device.
Please address any questions about the DSL or cable connection to your net-
work provider.
Authorization
The Gigaset WLAN-Adapter is intended for operation in your country, as dis-
played on the underside of the device. The device complies with the R&TTE
guideline, as shown by the CE mark.
Possible cause
The batteries are flat.
Handset outside the base
station range.
Handset not registered.
Base not connected to
power supply.
Calling line identification is
blocked.
The memory is full.
Date/time not set.
0 87 05 33 44 11
18 50 77 72 77
Possible solution
Charge or replace the batteries
(see page 4).
Reduce distance between handset
and base.
Register the handset (see page 9).
Check the power connector at the
base (see page 3).
The caller must request identifica-
tion of his telephone number from
his network provider.
Delete old messages
(see page 15).
Set the date and time
(see page 10)
20
.
Advertisement
Table of Contents
