Opening The Firewall For Selected Pcs (Exposed Host) - Gigaset SE555 WLAN dsl First Steps

ì
Click the Delete button to delete an entry.
ì
Click OK to apply the settings.

Opening the firewall for selected PCs (Exposed Host)

You can set up a client in your local network to be a so-called "exposed host". Your device
will then forward all incoming data traffic from the Internet to this client. You can then,
for example, operate your own Web server on one of the clients in your local network
and make it accessible to Internet users.
As the exposed host, the local client is directly visible to the Internet and therefore par-
ticularly vulnerable to attacks (e.g. hacker attacks). Only activate this function if it is
absolutely necessary (e.g. to operate a Web server) and other functions (e.g. port for-
warding) are not adequate. In this case you should take appropriate measures for the
clients concerned.
Note:
Only one PC per public IP address can be set up as an Exposed Host (see also the sec-
tion entitled Port Forwarding on page 65).
ì
To set up a PC as an exposed host, select Exposed Host from the Address Transla-
tion (NAT) menu.
ì
Enter the Local IP address of the PC that is to be enabled as an Exposed Host.
ì
Enter a name for the PC in the Comment field.
ì
Activate Enabled by ticking the check box.
ì
Click the Add button to add the entry to the list.
ì
Click the Delete button to delete the entry from the list.
ì
Apply the settings by clicking OK.
Configuring Advanced Settings
67