Installing A Socket-370 Processor - MATSONIC MS7191SM User Manual

5. Locate the jumper JP4. Use this jumper to select if you have
installed a Slot-1 processor or a Socket-370 processor. The
jumper settings are illustrated below.
1
JP4
Selects a Slot-1
processor
6. On this mainboard, you can configure the processor by
entering the correct settings in the BIOS setup utility.

Installing a Socket-370 Processor

The Celeron processor installs into the ZIF (Zero Insertion Force)
Socket-370 on the mainboard.
1. Locate the Socket-370, FAN1, and JP4. Pull the locking lever
out from the socket and swing it to the upright position.
FAN1
2. On the Celeron processor, identify the pin-1 corner by noting
that it has a slight bevel.
3. On the Socket-370, identify the pin-1 corner. The pin-1 corner
is on the same side as the locking lever, closest to the top of the
lever when it is in the locked position.

! 


   
1
JP4
Selects a Socket-370
processor
Socket-370
Pin-1 Corner
1
JP4
11