Chicago Electric 66783 Set Up And Operating Instructions Manual

Chicago Electric 66783 Set Up And Operating Instructions Manual

Battery charger/starter

Advertisement

Battery Charger/starter
set up and Operating instruCtiOns
distributed exclusively by harbor Freight tools
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
saVe this manual.
Copyright
2009 by Harbor Freight Tools
©
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
3491 Mission Oaks Blvd., Camarillo, CA 93011
. All rights reserved. No portion of this manual or any artwork
®
66783
.
®

Advertisement

Table of Contents
loading

Summary of Contents for Chicago Electric 66783

  • Page 1 Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
  • Page 2: Specifications

    “ saVe these instruCtiOns” - This manual contains important safety and operating instructions for battery charger Model: 66783. Do not expose charger to rain or snow. Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons.
  • Page 3: Grounding And Ac Power Cord Connection Instructions

    Improper connection can result in a risk of an electric shock. This battery charger is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in sketch A in Below Figure. A temporary...
  • Page 4: Personal Precautions

    Use this charger for charging LEAD-ACID batteries only. It is not intended to supply power to a low voltage electrical system other than in an automotive application. Do not use battery charger for charging dry-cell batteries that are commonly used with home appliances. These batteries may burst and cause injury to persons and damage to property.
  • Page 5: Charger Location

    For positive-grounded vehicle, only connect NEGATIVE (BLACK) clip from battery charger to NEGATIVE (NEG, N, -) ungrounded post of battery. Connect POSITIVE (RED) clip to vehicle chassis or engine block away from battery. Do not SKU 66783 For technical questions, please call 1-800-444-3353.
  • Page 6 Specific Safety Rules for the Battery Charger Maintain labels and nameplates on the Battery Charger. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Always wear safety impact eye goggles and heavy work gloves when using the Battery Charger.
  • Page 7: Risk Of Explosion

    When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
  • Page 8 Charger in until direCted tO dO sO in the FOllOWing pages OF this manual. Page 8 For technical questions, please call 1-800-444-3353. setup about Charging Batteries Figure 1 SKU 66783...
  • Page 9: Preparing And Charging Batteries

    With the Battery Charger unplugged, connect the positive (red) Cable Clamp (2) to the positive terminal reV 09g; 09h SKU 66783 For technical questions, please call 1-800-444-3353. of the battery. If charging a battery mounted in a vehicle, first remove the vehicle’s red cable from the battery;...
  • Page 10: Engine Starting

    Stop attempting to start/charge the battery until the problem is found and corrected. Continued engine cranking may damage the vehicle’s starter. start reV 09b SKU 66783...
  • Page 11: Maintenance

    Warning: unplug the Charger from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. Before each use, inspect the general condition of the Battery Charger. Check for loose screws, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation.
  • Page 12: Limited 90-Day Warranty

    90 day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this...

Table of Contents