Technical Specifications; Installation; Positioning - Electrolux ER 1622 T Instruction Booklet

Hide thumbs Also See for ER 1622 T:
Table of Contents

Advertisement

TECHNICAL SPECIFICATIONS

DIMENSIONS
POWER SUPPLY VOLTAGE AND FREQUENCY
TOTAL POWER ABSORBED
AVERAGE DAILY UNITS ELECTRICITY(*)
:
GROSS CAPACITY
NET CAPACITY
(*)This figure is based on standard test results in accordance with European Standard EN153. Actual
consumption will depend on how the appliance is used and where it is located).

INSTALLATION

Positioning

For this appliance to work efficiently, it should be
located away from heat sources, e.g. cookers,
radiators, boilers, direct sunlight etc. This also
includes locations or rooms where the ambient
temperature rises above 32°C or drops below 10°C
(e.g. conservatories).
You should also ensure that air can circulate freely
around the back and the top of the cabinet.
There must also be a minimum distance between the
top of the cabinet and any overhanging kitchen
furniture as shown in the figure.
Do not obstruct the space underneath.
The back of the cabinet may be placed close to the
wall but must not touch it. DO NOT install in places
with restricted ventilation.
Adjust the level of the appliance by screwing out the
adjustable foot, or feet, at the bottom of the cabinet
using your fingers.
Height
Width
Depth
220-240 V / 50 Hz
90 W
0,66 kWh
160 l
154 l
A
NP006
D200
14
85
cm
54,5
cm
60
cm
B

Advertisement

Table of Contents
loading

Table of Contents