Personality Settings - Martin MAC 600E User Manual

Personality settings

Personality
Pan/tilt speed PTSP
Pan/tilt swap PATI/SWAP
Pan inverse
PATI/PINV
Tilt inverse
PATI/TINV
Tracking algorithm
SPEC/TRAC/MOdE
Tracking samples
SPEC/TRAC/CAL
Effects speed
EFSP
Display on/off
SPEC/dISP
Display intensity
SPEC/dINT
DMX lamp off
SPEC/dLOF
DMX reset
SPEC/dRES
Automatic lamp on
SPEC/ALON
Automatic protocol
SPEC/AUTO
detection
Shortcuts
SPEC/SCUT
Automatic shutter
SPEC/ASHT
Studio mode
MOdE
Pan/tilt feedback
SPEC/FEbA
Effects feedback
SPEC/EFFb
Fan speed
SPEC/FAN
Electronic ballast
SPEC/ETYP
type
12
Path Options
FA ST
NORM
ON
OFF
ON
OFF
ON
OFF
MOd1
MOd2
1-10
FAST
SAFE
ON
OFF
10 100
-
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
NORM
STUd
ON
OFF
ON
OFF
REG
FULL
SCHI
MITR
Effect (Default settings shaded.)
Optimize movement for speed.*
Optimize movement for smoothness.*
Map DMX pan control to tilt channel and vice versa.
Normal pan and tilt control.
Reverse DMX pan control, right
Æ
Normal pan control, left
Reverse DMX tilt control, down
Æ
Normal tilt control, up
Absolute delta value algorithm (for most controllers)
Real delta value algorithm
Tracking samples. Increase if pan/tilt is not smooth.
Normal, full speed operation.
Reduced speed operation (mainly for early models).
Display stays on.
Display goes out 2 minutes after last key press.
Adjust display intensity.
Enable DMX lamp off command.
Disable DMX lamp off command.*
Enable DMX reset command.
Disable DMX reset command.*
Lamp strikes automatically within 90 seconds of power on.
Strike lamp from controller.
Enable automatic protocol detection.
Disable automatic protocol detection.
Effect wheels turn the shortest direction.*
Effect wheels always turn same direction.*
Shutter "helps" dimmer black out.
Shutter not affected by dimmer commands.
Optimize effects for speed.*
Optimize effects for silence.*
Enable pan/tilt position correction system.
Disable pan/tilt feedback. Setting not saved.
Enable feedback on effect wheels.
Disable feedback on effect wheels.
Enable automatic fan speed regulation.
Set fan speed to full.
Select Schiederwerk ballast (MAC 600 E's after S/N
4020700000)
Select Mitronic ballast (MAC 600 E's with date-based S/N or
before S/N 4020700000)
* Setting may be overridden via DMX. See the protocol for details.
MAC 600/E
Æ
left.
right.
Æ
up.
down