Before You Start; Checking The Supplied Accessories; How To Use This Manual; Installing The Amplifier - Pioneer VSA-E07 Operating Instruction

Audio/video multi-channel amplifier
Hide thumbs Also See for VSA-E07:
Table of Contents

Advertisement

Before You Start

Checking the Supplied Accessories

Please check that you have received all of the following supplied accessories.
"AA" IEC LR6 batteries

How to Use This Manual

This manual is for the VSA-E07 Audio/Video Multi-Channel Amplifier.
This manual is divided into two main sections which will tell you how to setup and use the unit :
PREPARATION
First carry out the tasks below in this "Before You Start" section to prepare the remote control, then connect the
amplifier to your other components as described in "Connecting Your Equipment" (p.8). Take special care to
connect your digital equipment like DVD and LD player properly to be able to take advantage of the amplifier's
surround sound systems (p.10-11). To learn about a specific button, control, or indicator, see "Displays &
Controls" starting on p.16.
SETUP
Performing the tasks in "Initial Set Up" (from p.23) is essential to get proper surround sound.
OPERATION
To play some music or soundtrack refer to "Basic Playback" on p.38. Doing the operations in "Remote Control of
Other Components" (p.50) is highly recommended so you can use this unit's remote control for all your
components. "Using Other Functions" (p.62) explains the other possibilities of the amplifier.
"Techno Tidbits & Problem-solving" (p.68) provide detailed technical information and a troubleshooting guide.
The following marks and symbols are used throughout the manual:
Provides additional information, precautions, and advice.
Indicates a blinking button, indicator, or display.
Indicates a steadily lit button, indicator, or display.

Installing the Amplifier

Ventilation
• When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at
least 60 cm at the top, 10 cm at the rear, and 30 cm at each side). If not enough space is provided between
the unit and walls or other equipment, heat will build up inside, interfering with performance or causing
malfunctions.
• Do not place on a thick carpet, bed, sofa or fabric having a thick pile. Do not cover with fabric or other
covering.
Anything that blocks ventilation will cause the internal temperature to rise, which may lead to breakdown or
fire hazard.
4
Remote control unit
Touch pen
(Attached to the back
of the remote control)
Cushion for Remote
4
5
En

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents