Panasonic QuintrixF TX-28PS10D Operating Instructions Manual page 5

QUICK START GUIDE
We recommend that as soon as the Auto setup feature is completed, the picture
6
controls are reset to normal viewing levels. To do this, press the "N" button, found
under the remote control's pull down flap.
7
Slight tilting of the picture may be noticeable or coloured patches may sometimes
appear at the corners of the screen (colour purity). The Geomagnetic Correction
feature can be used to eliminate them, if necessary:
First, ensure the ATP and Q ---Link download procedures are complete. The screen
should not be showing any On ---Screen Display menus.
Using the remote control keys indicated, access the Geomagnetic Correction menu
option and follow the procedure below (for a full explanation of the On Screen
Display menu system see page 7) :
Press the SETUP menu button
Move to the Geomagnetic menu option
Access the Geomagnetic menu
Adjust the picture tilt as necessary
Press the TV/AV button to exit the SETUP menu
The function 'geomagnetic correction' is also accessible from the front panel.
Press the F button repeatedly until the Geomagnetic Correction feature is displayed.
Press the + or --- buttons repeatedly until the picture appears to be level.
Press the F button again to return to normal viewing. Close the flap to prevent damage.
8
You are now ready to begin viewing programmes
The cursor controls provide the two basic functions:
Press and release here to open flap
SET UP
TV/AV
Adjust Volume Change Programme
N
F
---/v
F
5