Setup Menu; Speaker Select; Setting The Time - Samsung LA19C350 User Manual

Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
Night : This mode provides an improved sound
■
experience compared to Normal mode, making almost
no noise. It is useful at night.

Speaker Select

(External speaker / TV speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
✎
When Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.
✎
When Speaker Select is set to External Speaker, you
should use these settings.
x
TV Speaker: Off , External Speaker: On
✎
When Speaker Select is set to TV Speaker, you
should use these settings.
x
TV Speaker: On , External Speaker: On
✎
If there is no video signal, both speakers will be mute.
Additional Setting
DTV Audio Level (MPEG / HE-AAC)
■
allows you to reduce the disparity of a voice signal
(which is one of the signals received during a digital TV
broadcast) to a desired level.
✎
According to the type of broadcast signal,
HE-AAC can be adjusted between -10dB and 0dB.
✎
To increase or decrease the volume, adjust
between the range 0 and -10 respectively.
SPDIF Output : SPDIF (Sony Philips Digital InterFace) is
■
used to provide digital sound, reducing interference going to
speakers and various digital devices such as a DVD player.
Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
✎
By connecting to 5.1ch speakers in a Dolby Digital
setup, maximize your interactive 3D sound experience.
Audio Delay: Correct audio-video mismatch, when
watching TV or video, and listening to digital audio
output using an external device such as an AV receiver.
Dolby Digital Comp (Line / RF)
■
signal disparity between a dolby digital signal and a
voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
✎
Line: Set the output level for signals greater or less than
-31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB.
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.

Setting the Time

¦
Time
Clock
■
features of the TV.
O
: This function
✎
Clock Mode (Auto / Manual)
MPEG /
✎
✎
Clock Set: Set the Day, Month, Year, Hour and Minute
manually.
✎
Time Zone: You can select your time zone.
✎
✎
✎
: This function minimizes
Select Line to obtain dynamic sound, and RF
to reduce the difference between loud and soft
sounds at night time.

Setup Menu

: Setting the clock is for using various timer
The current time will appear every time you press
the button.
INFO
If you disconnect the power cord, you have to set
the clock again.
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
The antenna must be connected in order to set
the time automatically.
Available only when Clock Mode is set to Manual.
This feature is only available in Australia.
This function is only available when
is set to Auto.
Depending on the broadcast station and signal,
the auto time may not be set correctly. If this
occurs, set the time manually.
Clock Mode
17
English