Table of Contents
Advertisement
and pump the Handle up and down
slowly. The latch will click as the
load is lowered. Continue pumping
the Handle until the load rests on the
ground.
11.
Clean, then store the tool indoors out
of children's reach.
uSer-maintenance
inStructiOnS
Procedures not specifically
explained in this manual must
be performed only by a qualified
technician.
frOm tOOl failure:
do not use damaged
equipment. if abnormal noise
occurs, have the problem
corrected before further use.
cleaning, maintenance, and
lubrication
1.
BefOre eacH uSe,
general condition of the tool. Check
for loose screws, misalignment or
binding of moving parts, cracked or
broken parts and any other condition
that may affect its safe operation.
2.
periOdicallY,
parts of the Jack with lubricating oil.
after uSe,
3.
cloth.
pleaSe read tHe
fOllOWing carefullY
THe MANUFACTUReR AND/OR DIS-
TRIBUTOR HAS PROvIDeD THe PARTS
LIST AND ASSeMBLy DIAgRAM IN
THIS MANUAL AS A ReFeReNCe TOOL
ONLy. NeITHeR THe MANUFACTUReR
SKU 66183
tO preVent
SeriOuS injurY
inspect the
lubricate moving
clean the tool with clean
for technical questions, please call 1-800-444-3353.
OR DISTRIBUTOR MAKeS ANy ReP-
ReSeNTATION OR WARRANTy OF ANy
KIND TO THe BUyeR THAT He OR SHe
IS qUALIFIeD TO MAKe ANy RePAIRS
TO THe PRODUCT, OR THAT He OR
SHe IS qUALIFIeD TO RePLACe ANy
PARTS OF THe PRODUCT. IN FACT,
THe MANUFACTUReR AND/OR DIS-
TRIBUTOR exPReSSLy STATeS THAT
ALL RePAIRS AND PARTS RePLACe-
MeNTS SHOULD Be UNDeRTAKeN By
CeRTIFIeD AND LICeNSeD TeCHNI-
CIANS, AND NOT By THe BUyeR. THe
BUyeR ASSUMeS ALL RISK AND LI-
ABILITy ARISINg OUT OF HIS OR HeR
RePAIRS TO THe ORIgINAL PRODUCT
OR RePLACeMeNT PARTS THeReTO,
OR ARISINg OUT OF HIS OR HeR IN-
STALLATION OF RePLACeMeNT PARTS
THeReTO.
Page 5
Advertisement
Table of Contents
