Table of Contents
Advertisement
Quick Start Guide
1
R.G.B
AV1
VCR
AV2
S - V
V
L
R
DC IN 15V
2
DC IN 15V
2
3
1
3
Main Power switch
Power Indicator
Example : TX-17LA1
R.G.B
AV1
VCR
AV2
S - V
V
L
R
STR
F
TV/AV
LED Indicator
Adaptor
connection only : Orange
STB : Red
On : No Light
Remote control
signal sensor
SET TOP BOX
VCR / DVD recorder
Plug in aerial and connect ancillary equipment
1
Connect the mains lead to the AC Adaptor.
2
Connect the AC Adaptor DC plug to the DC IN
socket.
3
Plug into household mains socket.
• Be sure to use the mains lead and AC adaptor
included in the accessories.
• Do not use the AC adaptor for other than the
specified equipment.
• Unplug the AC adaptor if it is not used for long time.
• Do not place any objects on the AC adaptor.
• Do not use the AC adaptor outdoors.
• Do not attempt to repair the AC adaptor if it is broken
or malfunctioning. Refer the servicing to the service
representative.
• Do not try to open the AC adaptor.
• Do not use water or wet cloth for cleaning the AC
adaptor.
Press the
turn the set on.
There are two ways to switch the TV set to
stand-by mode.
(A) Press the
and check RED LED is lit.
(B) Press the
remote control.
The TV set can be switched on by the remote
control if it was switched to stand-by using
method (A) or method (B).
OR
switch on the LCD TV to
IMPORTANT NOTES
switch on the LCD TV
OR
Stand-by button on the
5
Advertisement
Table of Contents
