Safety Precautions - Panasonic Viera TX-L47ET50B Operating Instructions Manual

Safety Precautions

Warning
■
Mains plug and lead
To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings below:
●
This TV is designed to operate on AC 220-240 V, 50 / 60 Hz.
● Insert the mains plug fully into the socket outlet.
●
Ensure that the mains plug is easily accessible.
●
Remove the mains plug when cleaning the TV.
●
Do not touch the mains plug with a wet hand.
●
Do not damage the mains lead.
Do not place a heavy object on
•
the lead.
Do not place the lead near a high
•
temperature object.
Do not pull on the lead.
•
Hold onto the mains plug body
when disconnecting the plug.
Do not move the TV with the lead plugged into a socket outlet.
•
Do not twist the lead, bend it excessively or stretch it.
•
Do not use a damaged mains plug or socket outlet.
•
Ensure the TV does not crush the mains lead.
•
●
Do not use any mains lead other than that provided with this TV.
IMPORTANT: THE MOULDED MAINS PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This TV is supplied with a moulded three pin mains plug for your safety and convenience.
A 5 amp fuse is fitted in this mains plug. Shall the fuse need to be replaced, please ensure that the replacement
fuse has a rating of 5 amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
If the mains plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the mains plug must not be used until a replacement cover is obtained.
A replacement fuse cover may be purchased from your local dealer.
Do not cut off the mains plug.
Do not use any other type of mains lead except the one supplied with this TV.
The supplied mains lead and moulded plug are designed to be used with this TV to avoid
interference and for your safety.
If the socket outlet in your home is not suitable, get it changed by a qualified electrician.
If the plug or mains lead becomes damaged, purchase a replacement from an authorized
dealer.
How to replace the fuse
For plug type shown in example 1:
Lift out the removable fuse compartment with a screwdriver and replace the fuse, then refit
securely into the mains plug (see example 1).
For plug type shown in example 2:
Lift open the fuse compartment, in the mains plug, with a screwdriver, and replace the fuse,
then press the fuse cover down securely (see example 2).
4
or the BSI mark on the body of the fuse.
If you detect anything unusual,
immediately switch off the mains supply
switch and remove the mains plug.
AC 220-240 V
50 / 60 Hz
Example 1
Example 2