Operating Instructions; Maintenance And Servicing - HAUL MASTER 66187 Owner's Manual And Safety Instructions

Operating Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
1. Measure the width of the ladder to be mounted
on top of the Ladder Rack and slide the
Arms (6) to fit the ladder allowing no more than
2" of space between ladder and Ladder Rack.
Tighten the Jam Bolts (4) securely.

Maintenance and Servicing

Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM RACK FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
1. BEFORE EACH USE, inspect the general
condition of the rack. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
Page 6 For technical questions, please call 1-800-444-3353.
2. Lay the ladder on top of the Frames (1)
between the vertical arms and slide it forward
until it contacts the Ladder Stop (7).
3. Use the Straps (8) to wrap around ladder rungs
and securely hold the ladder in place using
hook and loop system attached to Straps.
2. AFTER USE, wipe external surfaces
of the rack with clean cloth.
Item 66187