Displaying Pc Screen On Tv - Panasonic Viera TX-P37X10E Operating Instructions Manual

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected.
●
To connect PC
INPUT
TV AV
ASPECT MENU N DIRECT TV REC
EXIT
OPTION
TEXT STTL INDEX HOLD
■
To return to TV
TV
■
PC menu setting
●
To make settings
Menu
Advanced
PC
Settings
PC
Setup
●
Other items
Note
●
For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3) by using HDMI cable
42
(p. 59).
p. 54
1
Select the external input
AV
2
Select "PC"
Input Selection
AV1
RETURN AV2/S
AV3/S
COMPONENT
PC
HDMI1
HDMI2
HDMI3
TV
(changed as desired)
"How to Use Menu Functions"
Item
W/B High R White balance of bright red area
W/B High B White balance of bright blue area
W/B Low R White balance of dark red area
W/B Low B White balance of dark blue area
Gamma Switches the gamma curve (S Curve / 2.0 / 2.2 / 2.5)
Reset to
Press the OK button to reset to the default Advanced PC Settings
Defaults
Switches to a wide view
●
Input VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
Resolution XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
●
Options change depending on signals
Clock Set to the minimum level if noise occurs
Adjusts horizontal position
H-pos
Adjusts vertical position
V-pos
Eliminates flicker and distortion
Clock Phase
●
Adjust after Clock adjustment
Chooses another synchronous signal if the image is distorted (H & V / On Green)
●
Sync H & V
On Green : by the green signal from your PC (if available)
Reset to
Press the OK button to reset to the default PC Setup settings
Defaults
p. 26 - 29
to (p. 24)
Adjustments / Configurations (options)
: by the horizontal and vertical signals from your PC
access
select
●
Corresponding signals
●
If "H-freq." or "V-freq." is shown in red,
the signals may not be supported.
and
repeatedly adjusted
●
Set to the minimum level if noise occurs
p. 60